Asela TFEC_Paper_17512.pdf (3.34 MB)
Non-premixed swirl flame modelling using the open source CFD package openfoam
conference contributionposted on 2017-05-05, 11:00 authored by Asela R. Uyanwaththa, Weeratunge MalalasekeraWeeratunge Malalasekera, Mark R. Dubal
In this work the Sydney swirl stabilized burner for a hydrogen:methane fuel mixture is numerically modelled using the OpenFOAM C++ library package. A non-reacting high swirl test case (N29S159) and a reacting low swirl test case (SMH1) were investigated using Large Eddy Simulations and the Steady Laminar Flamelet concept. For the non-reacting case the velocity field components are in very good agreement with experimental results. For the reacting flow case the velocity components are also in excellent agreement with experimental values, however the scalar quantities exhibit some under prediction. Possible reasons for the under prediction are discussed.
This work is supported by EPSRC(UK) and E.ON Energy under industrial CASE Award No 12440071.
- Mechanical, Electrical and Manufacturing Engineering
Published in2nd Thermal and Fluid Engineering Conference, TFEC2017
CitationUYANWATHTHA, A., MALALASEKERA, W. and DUBAL, M., 2017. Non-premixed swirl flame modelling using the open source CFD package openfoam. IN: Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017, Las Vegas, USA, 2-5 April 2017.
Publisher© American Society of Thermal and Fluids Engineers (ASTFE), Begell House Inc.
- AM (Accepted Manuscript)
Publisher statementThis work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/
NotesThis is a conference paper.