Embargoed and Restricted Access
Reason: Under embargo until February 2020. After this date a copy can be supplied under Section 51 (2) of the Australian Copyright Act 1968 by submitting a document delivery request through your library, or by emailing document.delivery@monash.edu
Nanoscale Zinc Oxide and Langasite Crystal Microbalance Based Energy-efficient Composite Resonator for UV Sensing Applications
thesis
posted on 2017-01-11, 00:40 authored by Tridib SahaThickness shear mode
(TSM) resonators, commonly known as quartz crystal microbalances (QCM), are
highly sensitive mass detectors, which can be utilized as selective sensors by
coating suitable sensing layers on the crystal surface. Over the past decade,
zinc oxide nanostructured materials have gained remarkable popularity as
sensing media for UV sensing applications because of their excellent
piezoelectric and semiconducting properties, and wide range of available
synthesis techniques. However, very little research has been conducted towards
integration of ZnO nanostructures on TSM resonators to fabricate highly
sensitive composite sensors. Low temperature-resistance of quartz and
associated challenges in synthesis of ZnO nanostructures directly on to quartz
crystals are the primary hindrances responsible for the lack of research in this
area. Therefore, it is essential to identify and exploit suitable piezoelectric
material to replace quartz for high-temperature operations. Furthermore,
potential of such sensors to detect UV radiation in real world applications,
where UV intensity is very low and photocurrent is extremely small, is yet to
be explored.
In this thesis, we develop a low-power composite resonator based on ZnO nanostructures and langasite crystal microbalance (LCM) for UV sensing application. Firstly, various ZnO nanostructures, including well-aligned ZnO nanowire arrays, were successfully synthesized via an optimized self-seeding thermal evaporation method. Influence of purified air as an oxygen source on UV emission and detection characteristics of as-grown nanostructures was thoroughly investigated. As-grown nanowires exhibited superior UV emission and UV detection properties, compared to that of other nanostructures. Next, the influence of geometry and positioning of the sensing medium on the resonant characteristics of the composite resonator was systematically investigated using finite element model (FEM) simulation and Laser Doppler Vibrometry (LDV). Significant enhancements in sensitivity and harvested energy were observed when ZnO micro-pillars of resonant heights were placed in areas of maximum displacement on the crystal surface. Based on these findings, a novel methodology was developed for low-temperature and controlled synthesis of ZnO nanostructures on specific areas of LCM. Zinc vapor trapping and two-stage temperature ramping processes were employed to achieve a catalyst-free, self-seeding growth of ZnO nanowires and other nanostructures at growth temperatures below 600 °C. Excellent UV sensing performance was observed for each fabricated sensor, including fast response and recovery times. Lastly, a novel, low-power UV sensor instrumentation was developed using a single-shot pulse excitation, which allowed for simultaneous measurement of photoelectric and piezoelectric activities in the sensor. LDV was utilized to correlate the effect of UV illumination on the acoustoelectric properties of ZnO coated LCM sensor. An equivalent circuit model was proposed to represent the observed phenomenon under the influence of UV illumination. Findings presented in this work open new avenues for TSM based sensing applications and pave the way towards development of low-power resonant UV sensors with superior sensing performance.
In this thesis, we develop a low-power composite resonator based on ZnO nanostructures and langasite crystal microbalance (LCM) for UV sensing application. Firstly, various ZnO nanostructures, including well-aligned ZnO nanowire arrays, were successfully synthesized via an optimized self-seeding thermal evaporation method. Influence of purified air as an oxygen source on UV emission and detection characteristics of as-grown nanostructures was thoroughly investigated. As-grown nanowires exhibited superior UV emission and UV detection properties, compared to that of other nanostructures. Next, the influence of geometry and positioning of the sensing medium on the resonant characteristics of the composite resonator was systematically investigated using finite element model (FEM) simulation and Laser Doppler Vibrometry (LDV). Significant enhancements in sensitivity and harvested energy were observed when ZnO micro-pillars of resonant heights were placed in areas of maximum displacement on the crystal surface. Based on these findings, a novel methodology was developed for low-temperature and controlled synthesis of ZnO nanostructures on specific areas of LCM. Zinc vapor trapping and two-stage temperature ramping processes were employed to achieve a catalyst-free, self-seeding growth of ZnO nanowires and other nanostructures at growth temperatures below 600 °C. Excellent UV sensing performance was observed for each fabricated sensor, including fast response and recovery times. Lastly, a novel, low-power UV sensor instrumentation was developed using a single-shot pulse excitation, which allowed for simultaneous measurement of photoelectric and piezoelectric activities in the sensor. LDV was utilized to correlate the effect of UV illumination on the acoustoelectric properties of ZnO coated LCM sensor. An equivalent circuit model was proposed to represent the observed phenomenon under the influence of UV illumination. Findings presented in this work open new avenues for TSM based sensing applications and pave the way towards development of low-power resonant UV sensors with superior sensing performance.