3D-printed Fresnel Lens.pdf (40.96 MB)
Design and fabrication of 3D-printed planar Fresnel zone plate lens
journal contribution
posted on 2017-02-20, 09:52 authored by Shiyu ZhangThese slides give the design principle about the 3D-printed planar Fresnel zone plate lens. CST was used for simulate the lens. The lens can be modelled as 3 solid concentric rings with different permittivity (shown in the slides). The paper is open access and freely available: http://ieeexplore.ieee.org/document/7466939/
Funding
EPSRC Doctoral Prize Research Fellowship
History
School
- Mechanical, Electrical and Manufacturing Engineering