helen lou

Publications

• Process simulation and optimization of methanol production coupled to tri-reforming process
• Optimal Reduction of the C1–C3 Combustion Mechanism for the Simulation of Flaring
• Sustainability assessment of polygeneration processes based on syngas derived from coal and natural gas
• Evaluation of the economic and environmental impact of combining dry reforming with steam reforming of methane
• Computational Fluid Dynamics Modeling of Industrial Flares Operated in Stand-By Mode
• Validation of a reduced combustion mechanism for light hydrocarbons
• A reduced reaction mechanism for the simulation in ethylene flare combustion
• Greenhouse Gas Emission Reduction using Advanced Heat Integration Techniques
• A sustainability root cause analysis methodology and its application
• Incorporating Exergy Analysis and Inherent Safety Analysis for Sustainability Assessment of Biofuels
• How can AI Better Serve Chemical Process Industry
• “Education Modules for Teaching Sustainability in A Mass and Energy Balance Course
• Scheduling Hazardous Waste Incinerators Using a Simulated Annealing Linear Programming Heuristic
• Chemical Plant Flare Minimization via Plantwide Dynamic Simulation
• Pressure-Driven Dynamic Simulation for Improving the Performance of a Multistage Compression System during Plant Startup
• Problem-Based Learning on Incorporation of Data Analysis Skills into Chemical Engineering Senior Advanced Analysis Course
• A Method for Flexible Heat Exchanger Network Design under Severe Operation Uncertainty
• Greenhouse Gas Emission Reduction Using Advanced Heat Integration Techniques
• A novel zone-based machine learning approach for the prediction of the performance of industrial flares
• Safety and Efficiency Enhancement in LNG Terminals
• Alternative emission monitoring technologies and industrial internet of things–based process monitoring technologies for achieving operational excellence
• Novel Methodology for Inherent Safety Assessment in the Process Design Stage
• Thermodynamic Analyses of Tri-reforming Reactions To Produce Syngas
• Sustainable Manufacturing and Water Sustainability
• Removal of Polycyclic Aromatic Hydrocarbons from Water Using Mn(III)-Based Advanced Oxidation Process
• Numerical simulation and cold experimental research of a low-NOx combustion technology for pulverized low-volatile coal
• Clean combustion and flare minimization to reduce emissions from process industry
• Simulation and economic evaluation of a coupled thermal vapor compression desalination process for produced water management
• A run time combustion zoning technique towards the EDC approach in large-scale CFD simulations
• Effect of Na2CO3 additive on the activation of coal gangue for alumina extraction
• Novel Process for Alumina Extraction via the Coupling Treatment of Coal Gangue and Bauxite Red Mud
• ANALYSIS OF A NOVEL METHOD FOR INHIBITING RUNAWAY REACTION VIA PROCESS MODELING
• Environmental Impacts of Hurricane Harvey on the Neches-Brakes Bayou River System in Beaumont, Texas
• A New Area of Utilizing Industrial Internet of Things in Environmental Monitoring
• Development of a reduced mechanism for sour gas flaring
• Evaluation of the effects of chemically enhanced primary treatment on landfill leachate and sewage co-treatment in publicly owned treatment works
• Combustion mechanism development and CFD simulation for the prediction of soot emission during flaring
• Flare performance modeling and set point determination using artificial neural networks
• Numerical simulation of a decoupling and Re-burning combinative Low-NOx coal grate boiler
• Process Simulation, Economic and Environmental Sustainability Assessment of a Gas-To-Liquids Process
• Reduced combustion mechanism for C1–C4 hydrocarbons and its application in computational fluid dynamics flare modeling
• Development and performance evaluation of a clean-burning stove
• On Numerical Simulation of Black Carbon (Soot) Emissions from Non-Premixed Flames
• Effects of CaO-K2CO3 on combustion behavior and emission properties of SO2and NOX during coal sludge combustion
• Parametric Study of Ethylene Flare Operations Using Numerical Simulation
• Biogas Reforming to Syngas: A Review
• Sustainability under Severe Uncertainty: A Probability Bounds Analysis Method
• Computational fluid dynamics modeling of laboratory flames and an industrial flare
• Development of machine learning algorithms for predicting internal corrosion of crude oil and natural gas pipelines
• Sustainability assessment of combined steam and dry reforming versus tri‐reforming of methane for syngas production
• A Strategy for Multi-objective Optimization under Uncertainty in Chemical Process Design
• Surface Coating Thickness Distribution in Electrodeposition: A Case Study on Copper Plating of Tube Inner Surface
• “Ant-Colony-System-Based Product-Performance-Focused Energy Optimization of Reactive Drying of Clearcoat
• Profitable Pollution Prevention: Concept, Fundamentals, and Development
• Solubility and Henry's Law Constants for Chlorinated Compounds in Water
• Ecological Input−Output Analysis-Based Sustainability Analysis of Industrial Systems
• Environmental Impact Assessment for Potential Continuous Processes for the Production of Carbon Nanotubes
• Optimal Design of a Water Reuse System in an Electroplating Plant
• Integrated process and product analysis: A multiscale approach to paint spray
• A probability distribution estimation based method for dynamic optimization
• Integrated product and process control of Single-Input-Single-Output systems
• Flare minimisation via dynamic simulation
• Large-scale dynamic simulation for security assessment of an ethylene oxide manufacturing process
• Conceptual design of carbon nanotube processes
• Cure-Window-Based Proactive Quality Control in Topcoat Curing
• Environmental impact assessment of different design schemes of an industrial ecosystem
• Hierarchical Pareto Optimization for the Sustainable Development of Industrial Ecosystems
• Integrated Electroplating System Modeling and Simulation for Near Zero Discharge of Chemicals and Metals
• An Improved γ-Analysis Method for Process Security Analysis
• A Structural Disturbance Propagation Model for the Conceptual Design of Highly Controllable Heat-Integrated Reaction Systems
• Process Security Assessment: Operational Space Classification and Process Security Index
• Sustainability Assessment of Industrial Systems
• Fast process security assessment theory
• Hierarchical decision making for proactive quality control: system development for defect reduction in automotive coating operations
• Design of a Switchable Water Allocation Network Based on Process Dynamics
• Process security analysis: γ-Analysis and σ-map
• A game theory based approach for emergy analysis of industrial ecosystem under uncertainty
• Rapid Prediction of Disturbance Propagation in a Non-Sharp Ternary Separation System
• Fuzzy model predictive control
• Integrated Modeling and Simulation for Improved Reactive Drying of Clearcoat
• Fuzzy-logic-based process modeling using limited experimental data
• Synthesis of an optimal wastewater reuse network
• Steady State Disturbance Propagation Modelling of Heat Integrated Distillation Processes
• Qualitative and Quantitative Analysis for Environmentally Benign Electroplating Operations
• Study on Near-Zero Flaring for Chemical Plant Turnaround Operation
• Assessment of Regional Sustainability Associated with Biofuel Production
• Profitable Pollution Prevention in Electroplating: An InProcess Focused Approach
• Electroplating
• Design for Process Security