Paolo Carbone

Publications

• Binary sequences for test signal generation obtained by evolutionary optimization
• Advanced software tools for parametric identification based on quantized data
• Statistical efficiency of synchronous time-to-digital converters
• A simple and accurate model for predicting mismatch effects in Photovoltaic Arrays
• Ranging results using a UWB platform in an indoor environment
• Message from the chairpersons
• A Wearable and Wirelessly Powered System for Multiple Finger Tracking
• A 5.6-GHz UWB Position Measurement System
• An Indoor AC Magnetic Positioning System
• Guest Editorial: Special Issue on Complex Measurement Systems
• Measuring the Noise Cumulative Distribution Function Using Quantized Data
• Design and Characterization of a Portable Ultrasonic Indoor 3-D Positioning System
• Parametric System Identification Using Quantized Data
• A Structured Methodology for Measurement Development
• Impact Factor and Research Quality
• A Particle Filter for Robust Calibration of RF Ranging Systems
• A Simple Ranging System Based on Mutually Coupled Resonating Circuits
• Information and Statistical Efficiency When Quantizing Noisy DC Values
• A Rigorous Analysis of Least Squares Sine Fitting Using Quantized Data: The Random Phase Case
• An Accurate Indoor Position-Measurement System Using Mutually Coupled Resonating Circuits
• Design and characterization of an ultrasonic indoor positioning technique
• Bias Compensation When Identifying Static Nonlinear Functions Using Averaged Measurements
• Histogram-Based Techniques for ADC Testing
• Inexpensive Time Dissemination Using Magnetically Coupled Resonators
• A simple ranging system based on mutually coupled resonating circuits
• Measurement Fundamentals: A Pragmatic View
• Accurate Sine-Wave Amplitude Measurements Using Nonlinearly Quantized Data
• Frequency and Amplitude Domain DAC-ADC Co-Testing Using Ternary Signals
• Online Identification of the LC Product in Coupled Resonant Circuits
• I&M in navigation systems
• Editorial: ADC Modelling, Testing and Data Converter Analysis and Design (vol 45, pg 2495, 2012)
• Low Complexity UWB Radios for Precise Wireless Sensor Network Synchronization
• ΣΔ-based removal of unwanted spectral components for sinewave synthesis
• Development of an IoT Structural Monitoring System Applied to a Hypogeal Site
• Estimation of the Magnetic Dipole Moment of a Coil Using AC Voltage Measurements
• Joint Measurement of Signal Parameters and ADC Transition Levels
• Calibration and Characterization of a Magnetic Positioning System Using a Robotic Arm
• Quick Estimation of Periodic Signal Parameters From 1-Bit Measurements
• Using Bluetooth Low Energy Technology to Perform ToF-Based Positioning
• Measurement of the Parameters of Multiple Sinusoids Based on Binary Data
• Parkinson’s Disease Patient Monitoring: A Real-Time Tracking and Tremor Detection System Based on Magnetic Measurements
• Low-Complexity 1-bit Detection of Parametric Signals for IoT Sensing Applications
• Quality of Measurement Information in Decision-Making
• Online EIS and Diagnostics on Lithium-Ion Batteries by Means of Low-Power Integrated Sensing and Parametric Modeling
• Gesture Recognition of Sign Language Alphabet Using a Magnetic Positioning System
• MagIK: A Hand-Tracking Magnetic Positioning System Based on a Kinematic Model of the Hand
• Digital Impedance Emulator for Battery Measurement System Calibration
• Gesture recognition of sign language alphabet with a convolutional neural network using a magnetic positioning system
• One-Bit Sine-Fit
• Uncertainty Characterization of a Practical System for Broadband Measurement of Battery EIS
• Woodchip humidity measurements using em pulse propagation time
• Data converters: An empirical research on the correlation between scientific literature and patenting activity
• A simple model for characterizing the behavior of photovoltaic modules
• Modeling noise effects in time-to-digital converters
• A simple time-domain-reflectometry based methodology for wood-chip humidity measurements
• Signal processing issues in indoor positioning by ultra wide band radio aided inertial navigation
• A sine generation and coherent sampling system with high time accuracy
• EESMS 2010 - 2010 IEEE Worskshop on Environmental, Energy, and Structural Monitoring Systems, Proceedings: Message from the chairpersons
• Integrated approach to a multifunctional complex: Sustainable design, building solutions and certifications
• Indoor positioning by ultra wide band radio aided inertial navigation
• Testing data converters when sampling is incoherent
• Performance Comparison of Advanced Techniques for Voltage Dip Detection
• Special Section on IMEKO 2011 International Workshop on ADC Modeling, Testing and Data Converter Analysis and Design and the IEEE 2011 ADC Forum
• Generalized Likelihood Ratio Test for Voltage Dip Detection
• Practical implementation issues in detecting voltage dips
• Experimental Comparison of Low-Cost Sub-Nanosecond Pulse Generators
• Performance Comparison of Advanced Techniques for Voltage Dip Detection
• A Survey on Time Interval Measurement Techniques and Testing Methods
• INDOOR POSITIONING BY ULTRAWIDE BAND RADIO AIDED INERTIAL NAVIGATION
• A Novel Sample-and-Hold-Based Time-to-Digital Converter Architecture
• Generalized Likelihood Ratio Test for Voltage Dip Detection
• Statistical Properties of Voltage Dip Detectors
• A Novel Charge-Pump Based Time-to-Digital Converter
• A Vector Approach for Image Quality Assessment and Some Metrological Considerations
• Accurate digital synthesis of sinewaves
• A Low-Cost Ultra-Wideband Indoor Ranging System
• A Portable Dielectric Constant Sensor Based on Time of Flight Measurements
• An Automated Procedure for Selecting Frequency and Record Length when testing Data Converters
• Statistical Properties of Voltage Dip Detectors
• Characterization and Modeling of an Experimental UWB Pulse-Based Distance Measurement System
• A comparison between foundations of metrology and software measurement
• An Experimental UWB Distance Measurement System
• Fault detection in atomic clock frequency standards affected by mean and variance changes and by an additive periodic component: the GLRT approach
• Experimental Low-Cost Short Pulse Generators
• Loopback Test and Error Correction of Data Converters
• A low-cost ultra-wideband indoor ranging technique
• Cramer-Rao Lower Bound for parametric estimation of quantized sinewaves
• Monitoring signal integrity of atomic clocks by means of the GLRT
• Binary sequences with good spectral properties obtained by genetic algorithms
• Detection of anomalies in the behavior of atomic clocks
• Noise parameter estimation from quantized data
• Image quality assessment: an overview and some metrological considerations
• Remote didactic laboratory "G. Savastano," the Italian experience for e-learning at the technical universities in the field of electrical and electronic measurements: Overview on didactic experiments
• A demodulation technique for the sensing circuit of a MEMS gyroscope
• Remote didatic laboratory "G. Savastano," The Italian experience for e-learning at the technical university in the field of electrical and electronic measurement: Architecture and optimization of the the communication performance based on thin client technology
• The generalized likelihood ratio test for detecting anomalous behaviors of atomic clocks - art. no. 660310
• A stability criterion for high-accuracy Delta-Sigma digital resonators
• High-precision UWB-based timestamping
• A vector approach to quality assessment of color images
• A demodulation technique for the sensing circuit of a MEMS gyroscope
• Fast estimation of A/D Converter Nonlinearities
• Stability analysis of oscillators based on a delta-sigma topology
• A stability criterion for high-accuracy Δ-∑ digital resonators
• Remote didactic laboratory "G. Savastano": The Italian experience for the E-learning at the technical universities in the field of the electrical and electronic measurements, architecture and delivered services
• Binary sequences with good spectral properties obtained by genetic algorithms
• Statistical efficiency of sinewave fitting when using non-linear quantizers
• Stochastic and reactive methods for the determination of optimal calibration intervals
• Optimal calibration interval determination techniques: The example of a Rubidium frequency standard
• A simple and time-effective procedure for ADC INL estimation
• Spectral estimation of wide-band noise in delta-sigma modulators
• Cramér-rao lower bound for parametric estimation of quantized sinewaves
• CDMA system sensitivity to A/D conversion
• Estimation of delta-sigma converter spectrum
• Estimation of the in-band Delta-Sigma noise power based on windowed data
• Measurement of static ADC nonlinearities using the servoloop method
• Accurate digital synthesis of sinewaves
• Average power estimation under nonsinusoidal conditions
• Performance of simple response method for the establishment and adjustment of calibration intervals
• Noise parameter estimation from quantized data
• Fast estimation of ADC nonlinearities using the Sinewave Histogram Test
• Metrology and software measurement: a comparison of some basic characteristics
• Optimal calibration interval in case of integrated Brownian behavior: The example of a rubidium frequency standard
• Sinewave generation with on board DAC non-linearity compensation using a Sigma Delta approach
• Simple and time-effective procedure for ADC INL estimation
• Spectral estimation of wideband noise in delta-sigma modulators
• CDMA system sensitivity to Sigma Delta A/D conversion
• Effective ADC linearity testing using sinewaves
• Synthesis of binary test sequences with good spectral properties using an evolutionary algorithm
• Design of a Delta-Sigma bandpass demodulator for a Z-axis MEMS vibrational gyroscope
• Introduction to special issue on ADC modelling and testing - 8th workshop on ADC modelling and testing
• Accuracy comparison between techniques for the establishment of calibration intervals: Application to atomic clocks
• A procedure for highly reproducible measurements of ADC spectral parameters
• Stochastic and reactive methods for the determination of optimal calibration intervals
• Accuracy comparison between techniques for the establishment of calibration intervals: Application to atomic clocks
• Estimation of the in-band delta-sigma noise power based on windowed data
• An open distributed measurement system based on an abstract client-server architecture
• Management of measurement uncertainty for effective statistical process control
• A procedure for highly reproducible measurements of ADC spectral parameters
• Measurement uncertainty and metrological confirmation in quality-oriented organizations
• Management of measurement uncertainty for effective statistical process control
• Statistical efficiency of the ADC sinewave histogram test
• Efficiency of ADC linearity estimators
• Sampling criteria for the estimation of multisine signal parameters
• Open distributed control and measurement system based on an abstract client-server architecture
• ADC sinewave histogram testing with quasi-coherent sampling
• Marginal probability density function of granular quantization error in uniform quantizers
• Windows for ADC dynamic testing via frequency-domain analysis
• ADC sinewave histogram testing with quasi-coherent sampling
• Design of ADC sinewave histogram test
• Remote didactic laboratory "G. Savastano": the Italian experience for the e-learning at the technical universities in the field of the electrical and electronic measurements, overview on didactic experiments
• Mean value and variance of noisy quantized data
• ΔΣPLL for 14 b 50 kSample/s frequency-to-digital conversion of a 10 MHz FM signal
• Dither signal effects on the resolution of non-linear quantizers
• Implementation of a parallel virtual instrument
• Fast least squares algorithms in linear identification
• Stochastic-flash analog-to-digital conversion
• Distortionless analog-to-digital conversion
• An implementation of a parallel virtual instrument
• Effective frequency-domain ADC testing
• Frequency-domain-based least-squares estimation of multifrequency signal parameters
• Sampling criteria for the estimation of multisine signal parameters
• Frequency-domain based least-squares estimation of multifrequency signal parameters
• Performance of stochastic and deterministic dithered quantizers
• Average power estimation under nonsinusoidal conditions
• Performance of stochastic and deterministic dithered quantizers
• Design and characterization of a stochastic-flash ADC
• Noise sensitivity of the ADC histogram test
• A delta-sigma PLL for 14-b, 50 kSample/s frequency-to-digital conversion of a 10 MHz FM signal
• Noise sensitivity of the ADC histogram test
• Estimation of non-stationary sinewave amplitude via competitive Kalman filtering
• PERFORMANCE OF STOCHASTIC QUANTIZERS EMPLOYING NON-LINER PROCESSING
• CONVERSION ERROR IN D/A CONVERTERS EMPLOYING DYNAMIC ELEMENT MATCHING
• Quantitative criteria for the design of dither-based quantizing systems
• Performance of stochastic quantizers employing nonlinear processing
• Rigorous error analysis of D/A conversion with dynamic element matching
• DITHER SIGNAL EFFECTS ON THE RESOLUTION OF NONLINEAR QUANTIZERS
• EFFECT OF ADDITIVE DITHER ON THE RESOLUTION OF IDEAL QUANTIZERS
• Windows for ADC dynamic testing via frequency-domain analysis
• EasyEIS: A software tool to perform electrochemical impedance spectroscopy using a source measure unit
• One-Bit Constrained Measurements of Parametric Signals
• A Traveling Standard for Calibration of Battery Impedance Measurement Systems
• Binary Sequences for Online Electrochemical Impedance Spectroscopy of Battery Cells
• Dataset on Broadband Electrochemical Impedance Spectroscopy of Lithium-Ion Batteries for Different Values of the State-of-Charge
• Low-complexity Electrochemical-Impedance Spectroscopy for Battery Monitoring
• Asymptotic Properties of a One-bit Estimator of Parametric Signals
• On the Usage of Battery Equivalent Series Resistance for Shuntless Coulomb Counting and SOC Estimation
• Time-Domain Battery Impedance Identification under Piecewise Constant Current Excitation
• Battery SOC estimation from EIS data based on machine learning and equivalent circuit model
• Uncertainty characterization of a CNN method for Lithium-Ion Batteries state of charge estimation using EIS data
• Development and Analysis of a UWB Relative Localization System
• LiPo batteries dataset: capacity, electrochemical impedance spectra, and fit of equivalent circuit model at various states-of-charge and states-of-health
• Battery Impedance Spectroscopy Embedded Measurement System
• One-Bit Measurements in Microwave Resonators
• A guide to equivalent circuit fitting for impedance analysis and battery state estimation
• Fast Battery EIS Measurement Using Flexible Local Rational Method