Martijn Schouten

Publications

• Hysteresis Compensation of 3D Printed Sensors Using a Power Law Model for Various Input Signals
• Hysteresis Compensation of 3D Printed Sensors by a Power Law Model with Reduced Parameters
• 3D printed flexible capacitive force sensor with a simple micro-controller based readout
• Characterizing the Electrical Properties of Anisotropic, 3D-Printed Conductive Sheets
• High Bending-Mode Sensitivity of Printed Piezoelectric Poly(vinylidenefluoride- co-trifluoroethylene) Sensors
• Modelling of Anisotropic Electrical Conduction in Layered Structures 3D-Printed with Fused Deposition Modelling
• Model Code of Anisotropic Electrical Conduction in Layered 3D-Prints with Fused Deposition Modeling
• 3D-Printed Calorimetric Flow Sensor
• Linearisation of a 3D printed flexible tactile sensor based on piezoresistive sensing
• A Review of Extrusion-Based 3D Printing for the Fabrication of Electro-and Biomechanical Sensors
• Characterizing the Electrical Properties of Anisotropic, 3D-Printed Conductive Sheets for Sensor Applications
• 3D Printed Differential Force and Position Sensor Based on Lossy Transmission Lines
• 3D printed capacitive shear and normal force sensor using a highly flexible dielectric
• Raspberry-bioamplifier
• A Review of Extrusion-Based 3D Printing for the Fabrication of Electro- and Biomechanical Sensors
• Development of a 3D Printed Gap Gauge with Embedded Force Sensor for Balancing Unicompartmental Knee Arthroplasty
• Characterization of 3D printed sheets using multi-frequency scanning impedance microscopy
• Inductive XY calibration method for multi-material fused filament fabrication 3D printers
• Evaluation of a 3D Printed Soft Sensor for Measuring Fingertip Interaction Forces
• Summation of currents electromagnetic solver
• Automated xy calibration for 3D printers using a scanner
• Inductive 3D printer XY calibration GUI
• A Sensorized 3D Printed Gap-Gauge Aiming to Improve Knee Prosthesis Survival
• Joint angle and torque estimation using multi-frequency electrical impedance myography and surface electromyography
• Joint Angle and Torque Estimation Using Multifrequency Electrical Impedance Myography and Surface Electromyography
• A Sensorized 3-D Printed Gap-Gauge Aiming to Improve Knee Prosthesis Survival
• Evaluating 3D printed sEMG electrodes with silver ink traces using in-situ impedance measurements