Mainak Saha

Publications

• https://www.academia.edu/download/56193170/1731.pdf
• Low cost synthesis of single walled Carbon nanotubes from Coal tar using arc discharge method
• STUDY OF AUSTENITIC STAINLESS STEEL CASTINGS
• A BRIEF STUDY OF ENERGY EFFICIENCY IN ALTERNATIVE ROUTES OF EXTRACTION OF Al and Mg
• Innovations in alternative energy sources in Indian Steel Plants
• Improvement in Heat Transfer Efficiency of Hismelt Process
• A Brief study of Ni-based Superalloys
• Cyclic Oxidation behaviour of ZrB 2-20vol.%MoSi 2 based Ultra-high Temperature Ceramic matrix Composite
• Oxidation of Eutectic High Entropy Alloys-A mechanism really difficult to understand
• Sequence of precipitation of sigma phase in CoCrCuMnNi High Entropy Alloy
• Analysis of structural differences of Ag Nanoparticles generated using Thermal and E-beam process based on SEM image
• Carbon-Based Nanocomposites: Processing, Electronic Properties and Applications
• A brief discussion on the tensile creep deformation behaviour of wrought single-phase γ-TiAl
• ɤ-TiAl alloy: revisiting tensile creep deformation behaviour and creep life at 832 °C
• Additive manufacturing of ceramics and cermets: present status and future perspectives
• Understanding the role of Al2O3 formed during isothermal oxidation in a dual phase AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
• ɤ-TiAl Alloy: Tensile Creep Deformation Behaviour and Creep Life at 832 °C
• On the Tensile Creep Deformation Behaviour of Wrought Single-phase γ-TiAl
• Grain Boundary Segregation In Steels: Towards Engineering The Design Of Internal Interfaces
• Fly Ash Composites: A Review
• On the correlative microscopy analyses of nano-twinned domains in 2 mol% zirconia alloyed yttrium tantalate thermal barrier material
• Advanced Materials for Biomechanical Applications
• Understanding the role of Al2O3 formed during isothermal oxidation in a dual phase AlCoCrFeNi 2.1 Eutectic High-Entropy Alloy
• Cyclic oxidation behaviour of ZrB2 -20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100 °C and 1300 °C
• Fly ash composites: A review
• Oxidation of ZrB2-MoSi2 ultra high-temperature Ceramic Matrix Composites: A brief review
• Grain boundary segregation in steels: Towards engineering the design of internal interfaces
• Additive manufacturing and characterisation of biomedical materials
• An insight into cyclic oxidation behaviour of ZrB 2 -20 vol.%MoSi 2 based ultra-high temperature ceramic matrix composite between 1100 °C and 1300 °C
• Microstructural Evolution of an Intermetallic Phase in a Complex-Concentrated Alloy: A Brief Case Study
• Revealing the Localization of NiAl-Type Nano-Scale B2 Precipitates Within the BCC Phase of Ni Alloyed Low-Density FeMnAlC Steel
• Additive Manufacturing and Characterisation of Biomedical Materials
• Understanding the role of Al2O3formed during isothermal oxidation in a dual phase AlCoCrFeNi2.1Eutectic High-Entropy Alloy
• Carbon-based nanocomposites: Processing, electronic properties, and applications
• A brief discussion on the tensile creep deformation behaviour of wrought single-phase c-TiAl
• Metal-Based Conducive Nano-Inks: A Review of Synthesis and Characterisation Techniques
• Surface Engineering of Nanomaterials: Processing and Applications
• Surface engineering of nanomaterials
• Metal-based conducive nano-inks: A review of synthesis and characterisation techniques
• An Insight Into Cyclic Oxidation behavior of ZrB2-20 Vol.% MoSi2 Based Ultrahigh Temperature Ceramic Matrix Composite
• Densification and characterization of pressureless sintered ZrB2-20 vol.% MoSi2 ultra high temperature ceramic composites
• Microstructure evolution and phase analysis of Sm60Ni40 alloy
• On the advanced microstructural characterisation of additively manufactured alumina-zirconia based eutectic ceramics: Overview and outlook
• Metal-based conducive nano-inks: synthesis and characterization techniques
• Cyclic Oxidation Behaviour of ZrB2 -20 vol.%MoSi2 Based Ultra-High Temperature Ceramic Matrix Composite Between 1100°C and 1300°C
• Deciphering the role of Al2O3 formed during isothermal oxidation in a dual-phase AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
• 3D printing of nanoceramics: Present status and future perspectives
• New frontiers in characterising ZrB$_2$-MoSi$_2$ ultra-high temperature ceramics
• Processing, electronic properties and applications of Carbon-based nanocomposites
• A brief discussion on the tensile creep deformation behaviour of wrought single phase $\gamma$-TiAl
• Cyclic oxidation behaviour of ZrB2-20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100°C and 1300°C
• On the tensile creep deformation behaviour of wrought single-phase γ-TiAl
• ɤ-TiAl alloy: Tensile creep deformation behaviour and creep life at 832 °C
• New frontiers in characterising ZrB2-MoSi2 ultra-high temperature ceramics
• Understanding the role of Al2O3 formed during isothermal oxidation in a dual phase AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
• A brief discussion on the tensile creep deformation behaviour of wrought single phase γ-TiAl
• A Brief Discussion on High-Entropy Alloys vs Compositionally Complex Alloys
• ɤ-TiAl Alloy: Tensile Creep Deformation Behaviour and Creep Life at 832 ℃
• 3D printing of nanoceramics for biomedical applications
• Ferrous and Non-Ferrous Extractive Metallurgy
• On the three-dimensional atomic scale characterization of nano-scale B2 phase in Ni-alloyed Fe-Mn-Al-C low-density steel
• On the three-dimensional atomic scale characterization towards understanding the evolution of nano-scale B2 phase in Ni-alloyed Fe-Mn-Al-C low-density steel
• Temporal evolution of nano-scale B2 precipitates and their localization in Ni-alloyed FeMnAlC low-density steel
• Three-dimensional atomic scale characterization of nano-scale B2 phase in Ni-alloyed Fe-Mn-Al-C low-density steel
• Densification and characterization of pressureless sintered ZrB2-20 vol.% MoSi2 ultra high temperature ceramic composites Densification and characterization of pressureless sintered ZrB2-20 vol.% MoSi2 ultra high temperature ceramic composites
• On the microstructural stability of phases and the associated mechanical response of Ni-alloyed FeMnAlC low-density steel-A correlative Microscopy study
• Ferrous and non-ferrous extractive metallurgy
• Ferrous and non-ferrous Extractive Metallurgy
• Ferrous and non-ferrous Extractive Metallurgy
• CARBON-BASED NANOCOMPOSITES: PROCESSING, ELECTRONIC PROPERTIES AND APPLICATIONS
• ɤ-TiAl alloy: On the tensile creep deformation behaviour and creep life at 832 °C
• Tensile and creep deformation of a fiber reinforced MgLi alloy
• On the electronic properties of graphene-based nanocomposites
• Carbon-Based Nanocomposites: Processing, Electronic Properties, and Applications
• CARBON-BASED NANOCOMPOSITES: PROCESSING, ELECTRONIC PROPERTIES AND APPLICATIONS
• 3D Printing of Nanoceramics: Present Status and Future Perspectives
• Nano-inks based on metal oxides for electronic industries
• Additive manufacturing of High Entropy Alloys: Trends, challenges and future perspectives
• MicroArt
• 3 Additive manufacturing of compositionally complex alloys: trends, challenges, and future perspectives
• Cyclic oxidation behaviour of ZrB2 -20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100°C and 1300°C
• Additive manufacturing of ceramics: Present status and future perspectives
• An insight into cyclic oxidation behaviour of ZrB2 -20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100°C and 1300°C
• On the advanced microstructural characterisation of additively manufactured alumina-zirconia based eutectic ceramics:
• Surface engineering of nanomaterials: Processing and applications
• Densification and characterization of pressureless sintered ZrB2-20 vol% MoSi2 ultra high temperature ceramic composites
• Additive manufacturing of ceramics: Present status and future perspectives
• A brief discussion on High-entropy alloys vs Compositionally Complex alloys
• Reduction in Charge Requirements of Hismeltiron-Making Process in Indian Context
• Analysis of structural differences of Ag Nanoparticles generated using Thermal and E-beam process based on SEM imaging
• On the pressureless sintering of ZrB2-20 vol% MoSi2 composites
• On the three-dimensional atomic scale characterisation towards understanding the sequence of nano-scale B2 phase evolution in Ni-alloyed Fe-Mn-Al-C low-density steel
• Combinatorial Alloy Design: Renaissance in the Accelerated Development of High-Entropy Alloys
• Additive Manufacturing of High Entropy Alloys: Trends, Challenges and Future Perspectives
• Order within disorder
• Temporal evolution of nano-scale B2 precipitates and their localization in Nialloyed FeMnAlC low-density steel
• Additive manufacturing of compositionally complex alloys: Trends, challenges, and future perspectives
• Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography
• Formation of Disordered Nano-particles and their influence on the Elevated Temperature Deformation of High Entropy Superalloys
• Theoretical prediction and experimental evaluation of spin Hall conductivity of Ir2MnAl Heusler alloy
• ɤ-TiAl alloy: Revisiting tensile creep deformation behaviour and creep life at 832 °C
• On the correlative microscopy analyses of nano-twinned domains in 2 mol % zirconia alloyed yttrium tantalate thermal barrier material
• Microstructures and properties of precipitation strengthened high-entropy alloys processed by SLM
• Towards Establishing Best Practice in the Analysis of Hydrogen and Deuterium by Atom Probe Tomography
• On the Hydrogen trapping tendencies of different microstructural features in a deformed pearlitic steel using Cryogenic Atom Probe Tomography
• Advancing the hydrogen tolerance of ultrastrong aluminum alloys via nanoprecipitate modification
• Identification of hydrogen trapping site in pearlitic steel by atom probe tomography
• Ordered B2 phase in a disordered FCC matrix: Current state of research on the development of low-density B2-strengthened Fe-Mn-Al-Ni-C steels
• Strain partitioning-induced anisotropy in thermomechanically processed magnesium alloys comprised of earth-abundant elements
• -TiAl alloy: Revisiting tensile creep deformation behaviour and creep life at 832 °C
• Ordered B2 phase in a disordered FCC matrix: Current state of research on the development of low-density B2strengthened Fe-Mn-Al-Ni-C steels
• Segregation-induced microstructural refinement in a FeMnAlC-TiB metal matrix composite by laser powder bed fusion