Ernesto Di Maio

Publications

• Sintering graded foamed beads: Compressive properties
• A microcapillary rheometer for microliter sized polymer characterization
• Rheology-driven design of pizza gas foaming
• Towards a systematic determination of multicomponent gas separation with membranes: the case of CO2/CH4 in cellulose acetates
• Bubble-Patterned Films by Inkjet Printing and Gas Foaming
• A design tool for core‐back timing in foam injection molding
• Enhancement of crystallization kinetics of poly(l-lactic acid) by grafting with optically pure branches
• Competing bubble formation mechanisms in rigid polyurethane foaming
• Flowering in bursting bubbles with viscoelastic interfaces
• Matricial foaming
• Developing Insulating Polymeric Foams: Strategies and Research Needs from a Circular Economy Perspective
• Modelling Sorption Thermodynamics and Mass Transport of n-Hexane in a Propylene-Ethylene Elastomer
• Ostwald Ripening Modulation by Organofluorine Additives in Rigid Polyurethane Foams
• Bubble Rupture and Bursting Velocity of Complex Fluids
• Role of Air Bubble Inclusion on Polyurethane Reaction Kinetics
• Heterogeneous Bubble Nucleation by Homogeneous Crystal Nuclei in Poly(l‐Lactic Acid) Foaming
• Gas foaming of polyphenyl sulfone: Effect of the blowing agents and operating parameters
• Cover Image, Volume 140, Issue 37
• Aerogel preparation from short cellulose nanofiber of the Eucalyptus species
• Thin-film drainage study based on holographic 3D particle tracking
• Recent advancements and perspective about digital holography: A super-tool in biomedical and bioengineering fields
• Foaming of polymers with supercritical fluids and perspectives on the current knowledge gaps and challenges
• Mechanical characterization of a polyurethane-cement hybrid foam in compression, tension, and shear
• Holographic phase imaging for full-field thickness mapping of evolving thin liquid films
• A novel lab-scale batch foaming equipment: The mini-batch
• Interferometric measurement of film thickness during bubble blowing
• Microcellular foaming of arabinoxylan and PEGylated arabinoxylan with supercritical CO2
• Modeling and simulation of viscoelastic film retraction
• Autoclave foaming of chemically modified polylactide
• Fast and Accurate Thickness Mapping of Liquid Bubbles and Thin Protein Films
• Investigating foamed polylactic acid films through cell structure alteration and processing conditions
• A poly-L-lactic acid/ collagen/glycosaminoglycan matrix for tissue engineering applications
• Insight into bubble nucleation at high-pressure drop rate
• Carbon nanotubes in microwave foaming of thermoplastics
• Dielectric Properties of Sustainable Nanocomposites Based on Zein Protein and Lignin for Biodegradable Insulators
• Thermosetting polyurethane foams by physical blowing agents: Chasing the synthesis reaction with the pressure
• Quantitative imaging of the complexity in liquid bubbles’ evolution reveals the dynamics of film retraction
• Polyether polyol/CO2 solutions: Solubility, mutual diffusivity, specific volume and interfacial tension by coupled gravimetry-Axisymmetric Drop Shape Analysis
• A pressure vessel for studying gas foaming of thermosetting polymers: sorption, synthesis and processing
• Mass transport and physical properties of polymeric methylene diphenyl diisocyanate/CO 2 solutions
• Elasticity in Bubble Rupture
• Early bubble coalescence in thermoplastic foaming
• Multi-graded foams upon time-dependent exposition to blowing agent
• Polyurethane synthesis under high-pressure CO2, a FT-NIR study
• Wettability of graphene by molten polymers
• Volumetric Properties and Sorption Behavior of Perfluoropolymers with Dioxolane Pendant Rings
• The effect of organofluorine additives on the morphology, thermal conductivity and mechanical properties of rigid polyurethane and polyisocyanurate foams
• Classification and Production of Polymeric Foams among the Systems for Wound Treatment
• A remote foaming experiment
• Selective Gold and Palladium Adsorption from Standard Aqueous Solutions
• Thermal management of a multiple mini-channel heat sink by the integration of a thermal responsive shape memory material
• Thermoplastic foaming assisted by microwave
• On the unexpected non-monotonic profile of specific volume observed in PCL/CO2 solutions
• Investigation of CO2 sorption in molten polymers at high pressures using Raman line imaging
• Scaffolds with tubular/isotropic Bi-modal pore structures by gas foaming and fiber templating
• Hydration-induced reinforcement of rigid polyurethane-cement foams: The effect of the co-continuous morphology on the thermal-oxidative stability
• Effect of two kinds of lignins, alkaline lignin and sodium lignosulfonate, on the foamability of thermoplastic zein-based bionanocomposites
• Hydration-induced reinforcement of rigid polyurethane-cement foams: Mechanical and functional properties
• The role of protein-plasticizer-clay interactions on processing and properties of thermoplastic zein bionanocomposites
• Architecture and properties of bi-modal porous scaffolds for bone regeneration prepared via supercritical CO 2 foaming and porogen leaching combined process
• Assessing the suitability of polylactic acid flexible films for high pressure pasteurization and sterilization of packaged foodstuff
• Solubility, mutual diffusivity, specific volume and interfacial tension of molten PCL/CO 2 solutions by a fully experimental procedure: Effect of pressure and temperature
• Microstructure, degradation and in vitro MG63 cells interactions of a new poly(ε-caprolactone), zein, and hydroxyapatite composite for bone tissue engineering
• Tailoring the pore structure of PCL scaffolds for tissue engineering prepared via gas foaming of multi-phase blends
• Thermodynamics of water sorption in poly(e{open}-caprolactone): A comparative analysis of lattice fluid models including hydrogen bond contributions
• Experimental characterization of phenolic-impregnated honeycomb sandwich structures for transportation vehicles
• Effect of supramolecular structures on thermoplastic zein-lignin bionanocomposites
• Design of bimodal PCL and PCL-HA nanocomposite scaffolds by two step depressurization during solid-state supercritical CO 2 foaming
• Tuning the microstructure and biodegradation of three-phase scaffolds for bone regeneration made of PCL, Zein, and HA
• Simultaneous experimental evaluation of solubility, diffusivity, interfacial tension and specific volume of polymer/gas solutions
• Processing/structure/property relationship of multi-scaled PCL and PCL-HA composite scaffolds prepared via gas foaming and NaCl reverse templating
• Solid-state supercritical CO2 foaming of PCL and PCL-HA nano-composite: Effect of composition, thermal history and foaming process on foam pore structure
• Novel 3D porous multi-phase composite scaffolds based on PCL, thermoplastic zein and ha prepared via supercritical CO2 foaming for bone regeneration
• Hydration-induced reinforcement of polyurethane-cement foams: Solvent resistance and mechanical properties
• Effect of molecular structure on film blowing ability of thermoplastic zein
• Processing and shelf life issues of selected food packaging materials and structures from renewable resources
• Investigation of Thermoplasticity of Zein and Kafirin Proteins: Mixing Process and Mechanical Properties
• Design of novel three-phase PCL/TZ-HA biomaterials for use in bone regeneration applications
• Poly(ethylene terephthalate) foams: Correlation between the polymer properties and the foaming process
• Extrusion foaming of biodegradable polymers
• Mechanical characterization of a new lightweight material for nonstructural components
• Thermoplastic foaming assisted by microwave
• Online analytical methods: Axisymmetric drop shape analysis
• Hydration induced crosslinking in biohybrid thermoplastic protein foams
• Osteogenic differentiation of CD271+ cells from rabbit bone marrow cultured on three phase PCL/TZ-HA bioactive scaffolds: Comparative study with mesenchymal stem cells (MSCs)
• Multifunctional lightweight bio-nanocomposites structures
• Biodegradable biomedical foam scaffolds
• Hollow micro- and nano-particles by gas foaming
• Raman Line Imaging of Poly(e-caprolactone)/Carbon Dioxide Solutions at High Pressures: A Combined Experimental and Computational Study for Interpreting Intermolecular Interactions and Free-Volume Effects
• Cellulose based hybrid hydroxylated adducts for polyurethane foams
• Supercritical CO2 foaming of thermoplastic materials derived from maize: Proof-of- concept use in mammalian cell culture applications
• Validated modeling of bubble growth, impingement and retraction to predict cell-opening in thermoplastic foaming
• Anomalous swelling of molten PCL/scCO2 solutions
• Easy-to-fill asymmetric polymeric micro-reservoirs
• Thermoplastic Processing of Blue Maize and White Sorghum Flours to Produce Bioplastics
• Strategies to Produce Thermoplastic Starch–Zein Blends: Effect on Compatibilization
• Morphology modulation of gas-foamed, micrometric, hollow polystyrene particles
• Polyurethane-silica hybrid foam by sol-gel approach: Chemical and functional properties
• Polystyrene Foaming at High Pressure Drop Rates
• PS foams at high pressure drop rates
• Preparation and Characterization of Polyurethane Porous Membranes by Particulate-leaching Method
• Heterogeneous bubble nucleation in PCL/clay nanocomposite foams
• The foaming process of biodegradable polyesters
• Characterization of microcellular biodegradable polymeric foams produced from supercritical carbon dioxide solutions
• Design of porous polymeric scaffolds by gas foaming of heterogeneous blends
• Design of novel multi-phase composite scaffolds for bone regeneration
• Engineering of foamed structures for biomedical application
• Timescales in bubble nucleation events for the formation of microcellular biodegradable foams
• Controlled preparation of porous scaffolds by gas foaming of heterogeneous blends
• Engineered μ-bimodal poly(ε-caprolactone) porous scaffold for enhanced hMSC colonization and proliferation
• Conventional and nanometric nucleating agents in poly(ε-caprolactone) foaming: Crystals vs. bubbles nucleation
• Process-structure relationships in PCL foaming
• Design and preparation of μ-bimodal porous scaffold for tissue engineering
• Polyurethane-cement-based foams: Characterization and potential uses
• Reactively modified poly (lactic acid): Properties and foam processing
• Structure optimization of polycaprolactone foams by using mixtures of CO 2 and N 2 as blowing agents
• Sorption thermodynamics and mutual diffusivity of carbon dioxide in molten polycaprolactone
• Thermoplastic foams from zein and gelatin
• Foaming of synthetic and natural biodegradable polymers
• Foaming of synthetic and natural biodegradable polymers
• A predictive approach based on the simha-somcynsky free-volume theory for the effect of dissolved gas on viscosity and glass transition temperature of polymeric mixtures
• Structure development during crystallization of polycaprolactone
• Isothermal crystallization in PCL/clay nanocomposites investigated with thermal and rheometric methods
• Isothermal crystallization kinetics of chain-extended PET
• Effect of molecular modification on PCL foam formation and morphology of PCL
• Characterization of microcellular biodegradable polymeric foams produced from supercritical carbon dioxide solutions
• Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
• Nanocomposites by melt intercalation based on polycaprolactone and organoclay
• Preparation and characterization of polyurethane porous membranes by particulate-leaching method
• Heterogeneous bubble nucleation in PCL/clay nanocomposite foams
• Sorption thermodynamics and mutual diffusivity of carbon dioxide in molten polycaprolactone