Bharatish A

Publications

• Influence of Femtosecond Laser Parameters and Environment on Surface Texture Characteristics of Metals and Non-Metals – State of the Art
• Evaluation of Wear on Macro-Surface Textures Generated by ns Fiber Laser
• Investigation of thermal residual stresses during laser ablation of tantalum carbide coated graphite substrates using micro-Raman spectroscopy and COMSOL multiphysics
• Optimization of ventilated brake disc rotor geometry for enhanced structural characteristics
• Characterization of hole circularity and heat affected zone in pulsed CO2 laser drilling of alumina ceramics
• Investigation of effect of CO2 laser parameters on drilling characteristics of rocks encountered during mining
• Assessment of drilling characteristics of alumina coated on aluminium using CO2 laser
• Assessment of thermal effects on the levitation speed of bump foil bearings made of low cost spring steel
• Effect of scanning speed and tin content on the tribological behavior of femtosecond laser textured tin-bronze alloy
• Evaluation of thermal residual stresses in laser drilled alumina ceramics using Micro-Raman spectroscopy and COMSOL Multiphysics
• Simultaneous optimization of nanosecond laser ablation and frictional characteristics of tantalum carbide coated graphite substrates
• Overview of Laser Absorptivity Measurement Techniques for Material Processing
• Thermal fatigue analysis of H13 steel die adopted in pressure-die-casting process
• Analysis of Fir Tree Root of Aero-engine Disc Assembly for Simultaneous Optimization of Fretting Characteristics
• Optimizing Tribological Performance of Laser-Induced Elliptical Textures on Nickel Aluminum Bronze Surface based on Genetic Algorithm
• Assessment of tribological behaviour of laser textured brake disc/composite brake pad system using adaptive neuro fuzzy interference system technique
• Machinability investigation of Chromoly steel using TiN/Al2O3/TiCN/TiOCN multilayer coated tungsten carbide tool inserts with artificial neural network methodology
• Optimization of laser texture geometry and resulting functionality of nickel aluminium bronze for landing gear applications
• Investigating the impact of laser polishing parameters on surface roughness, mass ablation rate, and optical transmittance of 3D‐printed PLA substrates
• Impact on casting die diameter size on microstructure and fractographic studies of Al2024 alloy reinforced with fly ash and SiC hybrid composites
• Investigation of residual stresses measured during laser surface modification of tantalum coated steel substrates
• Effect of laser ablation on mechanical performance of graphene-filled glass fibre reinforced polymer repaired composites
• Optimisation of laser surface ablation of alumina/GO coating on AZ31D magnesium alloy using Cuckoo Search Algorithm method
• Effect of Honeycomb Geometrical Parameters on Equivalent Radiated Power and Frequency Response of Motor Casing and Gearbox Surface of a Powertrain
• On Optimising Wettability, Surface roughness and Swelling Behaviour of Laser-polished 3D-printed PETG Polymer for Bio-medical Implants