TiO2 Nanofilms on Polymeric Substrates for the Photocatalytic Degradation of Methylene Blue
journal contributionposted on 13.11.2019, 15:05 by Hesam Maleki, Volfango Bertola
A low-temperature process to synthesize and print photoactive TiO2 nanofilms onto polymeric substrates using a modified desktop inkjet printer is presented. The coated substrates were assembled in a microfluidic device for photocatalytic studies fabricated by selective transmission laser welding. The synthesized TiO2 showed a competitive activity compared with commercial TiO2 nanopowders. Furthermore, the coated catalyst remained active and intact even after a long-term reaction run. The inkjet printing method can be utilized for the efficient immobilization of catalytic films onto reactor walls in the design of continuous flow reactors. A dispersed TiO2 sol was prepared by the thermohydrolysis of TiCl4 below 100 °C. The resulting sol was stabilized by using ethylene glycol and directly printed onto the substrate without further heat processing. The printability and colloidal stability of the inks were assessed by measuring their rheological and interfacial properties. X-ray powder diffraction (XRD) analysis identified the synthesized TiO2 as pure anatase nanosized particles (∼4.5 nm) verified by transmission electron microscopy (TEM). The photocatalytic activity of the printed layers was studied in the microreactor based on the degradation of methylene blue. Inkjet printing proved to be a customizable technique for coating active nanocatalysts. The overall process presented here is cost-effective and efficient in manufacturing flexible lightweight microreactors coated with highly tunable TiO2 catalytic films.