figshare
Browse

Fracture of 3D-printed micro-tensile specimens: filament-scale geometry-induced anisotropy

Download (1.22 MB)
journal contribution
posted on 2021-03-23, 16:15 authored by James Allum, Andy GleadallAndy Gleadall, Vadim SilberschmidtVadim Silberschmidt
The interlayer interface was widely considered as the reason for anisotropic mechanical properties in 3D-printed parts produced by material extrusion additive manufacturing (MEAM). Still, the cause has remained widely debated. Utilising a specially developed micro-tensile specimen formed by single filaments, this study examines the roles of their orientation and filament-scale geometric features on mechanical performance. The specimens were loaded in two directions: (i) longitudinal (F), coinciding with the main axis of extruded filaments, and (ii) transverse (Z), normal to the interface between layers. To replicate the geometrical groove features found at the interlayer interfaces in Z specimens, some of the F specimens were scored manually perpendicular to the load prior to tensile testing to produce similar filament-scale features. Tensile testing of all specimens with microscopic characterisation showed that both F specimens (with and without manual grooves) and Z specimens shared very similar strength characteristics, close to those of bulk polylactide (PLA). Manually grooved F specimens demonstrated significantly reduced plasticity, strain-at-fracture and load-bearing area - very close to the Z specimen's characteristics indicating that the presence of natural grooves in Z specimens is the predominant cause of mechanical anisotropy in MEAM as opposed to commonly assumed poor interlayer molecular diffusion.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

Procedia Structural Integrity

Volume

28

Pages

591 - 601

Publisher

Elsevier BV

Version

  • VoR (Version of Record)

Rights holder

© The Authors

Publisher statement

This is an Open Access Article. It is published by Elsevier under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence (CC BY-NC-ND 4.0). Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

2020-12-01

Copyright date

2020

ISSN

2452-3216

eISSN

2452-3216

Language

  • en

Depositor

Prof Vadim Silberschmidt. Deposit date: 18 March 2021

Usage metrics

    Loughborough Publications

    Categories

    No categories selected

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC