Figure_2.tif (2.76 MB)
Download file

Diver demonstrates DRR methodology with inset showing level gauge.

Download (0 kB)
posted on 2013-02-22, 11:09 authored by Phillip Dustan, Orla Doherty, Shinta Pardede

Digital Rugosity measurements are accomplished by using the instrument as a plumb-bob to slowly follow the contour of the reef as closely as possible. The pressure transducer is located near the end of the instrument closest to the substrate. The recorded pressure depth is offset from the actual reef substrate depth by the distance between the transducer and the substrate (photo A Alling).


Usage metrics