figshare
Browse

Changes in EPSC parameters have little effect on the ISI distribution.

Download (852.75 kB)
figure
posted on 2017-07-06, 17:37 authored by Trystan Leng, Gareth Leng, Duncan J. MacGregor

We investigated how changes to the EPSC parameters affect the ISI distribution in the HH model when the spike rate is kept constant at 9 spikes/s. (A) Increasing the EPSC magnitude (Δepsc) slightly increases the number of short ISIs, shifting the distribution to the left, with a small decrease in the height of the mode. Plotted distributions are for EPSP magnitudes of ~ 1, 2, 3, and 4 mV (darkest to lightest). The changes in EPSPs that result from the changes in kepsc are plotted on the right. EPSC rates (Repsc = 2920, 1294, 774 and 526 Hz respectively) were adjusted to achieve a firing rate of 9 spikes/s. (B) Increasing the EPSC time-constant (τepsc) very slightly increases the number of short ISIs, shifting the distribution to the left, with a small decrease in the height of the mode. Plotted distributions are for τepsc = 1.1, 2.2, 3.3, and 4.4 ms (yellow to dark red). The changes in EPSPs that result from the changes in τepsc are plotted on the right. EPSC rates (Repsc = 2685, 1220, 774, and 567 Hz respectively) were adjusted to achieve a firing rate of 9 spikes/s.

History