Data for Zhu et al. "Validation of an Electronic VOC Sensor Against Gas Chromatography–Mass Spectrometry"

<p dir="ltr">1. BME680 Calibration Tests</p><p dir="ltr">This dataset contains data for 8 different concentrations of alpha-pinene: 1 ppb, 10 ppb, 25 ppb, 50 ppb, 100 ppb, 200 ppb, 500 ppb, and 1000 ppb. Each concentration was tested in triplicate using three different sensors: TCA0, TCA1, and TCA3. Each concentration run includes three repetitions for each sensor.</p><p dir="ltr">File format: BME680_gas_sensor_[sensor number]_[ISO-UTCdatetime].csv</p><p dir="ltr"><br></p><p dir="ltr">2. BME Continuous Run</p><p dir="ltr">This dataset includes data from a continuous run used for two-point sensor calibration. Data were collected from four sensors, each continuously recording data for 5 different concentrations of alpha-pinene.</p><p dir="ltr">File format: BME680_gas_sensor_[sensor number]_[ISO-UTCdatetime].csv</p><p dir="ltr"><br></p><p dir="ltr">3. BME Validation Tests</p><p dir="ltr">This dataset contains data for 3 concentrations of alpha-pinene, recorded by three sensors: TCA0, TCA1, and TCA3. Each concentration was tested in triplicate.</p><p dir="ltr">File format: BME680_gas_sensor_[sensor number]_[ISO-UTCdatetime].csv</p><p dir="ltr"><br></p><p dir="ltr">4. GC Calibration Data</p><p dir="ltr">This dataset is organized by concentration of alpha-pinene, including 0.01 ppb, 0.1 ppb, 1 ppb, 10 ppb, 25 ppb, 50 ppb, 100 ppb, and blank tests. The processed data is compiled in an Excel workbook titled 'Peaks all in one.xlsx'.</p><p dir="ltr"><br></p><p dir="ltr">File Format: CSV</p><p dir="ltr">All data: concentration</p><p dir="ltr">Internal standard molecule: concentration 174-95</p><p dir="ltr">Alpha-pinene molecule group 1: concentration 136-93</p><p dir="ltr">Alpha-pinene molecule group 2: concentration 93-77</p><p dir="ltr"><br></p><p dir="ltr">5. GC Validation</p><p dir="ltr">This dataset contains data for three concentrations: 30 ppb, 50 ppb, and 100 ppb. Each concentration has two files: one for internal standard results and another for tested alpha-pinene. Each concentration was tested in triplicate. The processed data is compiled in an Excel workbook titled 'Peaks areas'.</p><p dir="ltr">File Format: concentration (repetition) ISTD/alpha.xlsx</p><p dir="ltr"><br></p><p dir="ltr">6. Calibration Excel Workbook</p><p dir="ltr">This workbook contains all the calculations for statistical analysis related to calibration.</p><p dir="ltr"><br></p><p dir="ltr">7. BME Validation Workbook</p><p dir="ltr">The 'GraphP_project' workbook contains all figures and data analysis related to the BME validation tests.</p><p dir="ltr">Format: GraphPad Prism workbook</p>