figshare
Browse
TWI+Jun+1996.pdf (7.08 MB)

The use of arc sound & on-line ultrasonic signal processing on computer technology in welding

Download (7.08 MB)
conference contribution
posted on 2017-08-31, 11:21 authored by John McCardleJohn McCardle, S. Swallow, Raymond Stroud, K.T. Burge
Monitoring the welding process on-line with ultrasound is problematic, but promises great rewards. A fast classifier is required to exploit the redundancy available in ultrasonic interrogation and ensure an adequate signal / noise ratio. TARDIS is such a classifier, using logical neural network techniques and dedicated hardware. The classification performance of TARDIS alone is noisy, but exceptionally fast. This speed of operation can be used to offset the fuzziness of individual classifications, using higher order correlations. The expert manual welder is capable of simultaneously monitoring visual and acoustic data and, coupled with a knowledge of the process and past experience, is able to attempt an optimum weld. Observations of skilled manual welders has shown a subconscious tendency to change the angle of the electrode and length of arc by listening to adverse fluctuations in the process noise in addition to visual assessment. This has resulted in much research into the analysis of airborne acoustic emissions (AEs) of welding processes. It is evident that to artificially copy these skills requires a fast, robust signal processing and pattern recognition technique similar the known architecture and operation of the brain. The Department of Design, Brunel University, has been researching the possibilities of including the monitoring of airborne acoustic emissions as an additional correcting factor in automated weld process control. Salient relationships between acoustic emissions and process parameters using off-line statistical techniques has been established, however, real time application remains problematic due to the computational intensity of such methods. Statistical approaches to the interpretation of arc sounds relies on the direct correlation observable between the acquired signal or its' various transforms and the monitored process parameters. The method is a time consuming and often mathematically gruelling . Artificial neural networks (ANNs) provide an alternative. By the construction of different architectures and the application of various learning algorithms ANNs can provide a noise tolerant adaptive knowledge acquisition system. The work discussed in this paper illustrates the methods of signal preprocessing and utilisation of artificial neural networks to interpret arc sounds. Techniques are used to filter and compress high dimensional erratic data patterns to form classifiable representations of the process state. Real time scenarios are discussed together with commercially viable hardware solutions.

History

School

  • Design

Published in

Proceedings of the 6th International Conference on Computer Technology in Welding Proceedings of the 6th International Conference on Computer Technology in Welding

Pages

Paper 33 - ?

Citation

MCCARDLE, J. ...et al., 1996. The use of arc sound & on-line ultrasonic signal processing on computer technology in welding. IN: Lucas, W.E. (ed.) Proceedings of the 6th International Conference on Computer Technology in Welding, Lanaken, Belgium, June 9-12th., Paper 33.

Publisher

Abington Publishing for TWI

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

1996

Notes

This is a conference paper.

ISBN

1855732629

Language

  • en

Editor(s)

Lucas, WE

Location

Lanaken, Belgium

Usage metrics

    Loughborough Publications

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC