figshare
Browse

File(s) under permanent embargo

Reason: contact nicky.eshtiaghi@rmit.edu.au or RMITRheologyGroup@gmail.com

Viscoelastic properties of Xanthan gum (0.3% to 0.6%) at different gas injection rate (0.5LPM to 2LPM)

Version 2 2017-12-10, 23:50
Version 1 2017-12-08, 20:25
dataset
posted on 2017-12-10, 23:50 authored by Veena BobadeVeena Bobade, Nicky EshtiaghiNicky Eshtiaghi

This submission contains the raw rheometer files from time sweep and creep test measurements for 4 different concentration of Xanthan gum (concentration = 0.3wt %, 0.4wt %, 0.5wt % &0.6wt %). The Xanthan gum samples were measured at four different gas flow rates (0.5 LPM, 1.0 LPM, 1.5 LPM & 2.0 LPM). The dynamic time sweep measurements were generated from the Xanthan gum sample first without gas at 0.15% strain across 1500 seconds. Then the sample was conditioned and the gas was injected for 20 minutes before the measurement at similar conditions. Similarly, the dynamic creep test measurements were generated from the xanthan gum sample first without gas at 3 pa stress across 1500 seconds.


The measurements were carried out on a DHR-3 rheometer (TA-Instruments), equipped with custom made cup.


Detailed experimental protocol is recorded in the .tri (TRIOS) file attached with each data set. This file can be read using the TRIOS software made available on TA-Instruments website (http://www.tainstruments.com/support/software-downloads-support/downloads/). Rheometer geometry dimensions and other details are also obtainable from these files.



History

Usage metrics

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC