Experimental study of the influence of friction at the supports on longitudinal shear resistance of composite slabs

<div><p>Abstract The aim of this work is to evaluate the behavior and strength of composite slabs considering the influence of the friction at the sheeting-concrete interface in the region of the support. Results from tests conducted in the Structural Engineering Department of Federal University of Minas Gerais (UFMG) were used. A Steel Deck 60 system was considered, which consists of a trapezoidal profile with “V” shaped embossments. Deflections, end slips and strains of the steel decks were measured, allowing for the analysis of the behavior of the composite slab system and for the determination of its failure mode. The influence of friction of the region of support in the longitudinal shear resistance was evaluated through the partial shear connection method, which also allowed for establishing criteria and determination of analytical expressions for calculating the ultimate load. Comparative analyses reveal that the influence of the friction of the region of support in the shear-bond resistance is more significant in composite slabs with short shear spans. Design expressions which incorporate friction will also be presented. Their application have demonstrated the efficiency of the method for evaluating the longitudinal shear resistance.</p></div>