Finsterbusch, Martin Danner, Timo Tsai, Chih-Long Uhlenbruck, Sven Latz, Arnulf Guillon, Olivier High Capacity Garnet-Based All-Solid-State Lithium Batteries: Fabrication and 3D-Microstructure Resolved Modeling The development of high-capacity, high-performance all-solid-state batteries requires the specific design and optimization of its components, especially on the positive electrode side. For the first time, we were able to produce a completely inorganic mixed positive electrode consisting only of LiCoO<sub>2</sub> and Ta-substituted Li<sub>7</sub>La<sub>3</sub>Zr<sub>2</sub>O<sub>12</sub> (LLZ:Ta) without the use of additional sintering aids or conducting additives, which has a high theoretical capacity density of 1 mAh/cm<sup>2</sup>. A true all-solid-state cell composed of a Li metal negative electrode, a LLZ:Ta garnet electrolyte, and a 25 μm thick LLZ:Ta + LiCoO<sub>2</sub> mixed positive electrode was manufactured and characterized. The cell shows 81% utilization of theoretical capacity upon discharging at elevated temperatures and rather high discharge rates of 0.1 mA (0.1 C). However, even though the room temperature performance is also among the highest reported so far for similar cells, it still falls far short of the theoretical values. Therefore, a 3D reconstruction of the manufactured mixed positive electrode was used for the first time as input for microstructure-resolved continuum simulations. The simulations are able to reproduce the electrochemical behavior at elevated temperature favorably, however fail completely to predict the performance loss at room temperature. Extensive parameter studies were performed to identify the limiting processes, and as a result, interface phenomena occurring at the cathode active material/solid–electrolyte interface were found to be the most probable cause for the low performance at room temperature. Furthermore, the simulations are used for a sound estimation of the optimization potential that can be realized with this type of cell, which provides important guidelines for future oxide based all-solid-state battery research and fabrication. 3 D reconstruction;High Capacity Garnet-Based All-Solid-State Lithium Batteries;all-solid-state battery research;25 μ m;electrode;LLZ;LiCoO 2;capacity;microstructure-resolved continuum simulations;Extensive parameter studies;interface;optimization;Ta-substituted Li 7 La 3 Zr 2 O 12;room temperature performance;room temperature 2018-06-11
    https://acs.figshare.com/articles/journal_contribution/High_Capacity_Garnet-Based_All-Solid-State_Lithium_Batteries_Fabrication_and_3D-Microstructure_Resolved_Modeling/6635525
10.1021/acsami.8b06705.s001