TY - DATA T1 - Pirólise rápida de biomassa de eucalipto na presença de catalisador Al-MCM-41 PY - 2018/01/10 AU - Camila Ribeiro de Oliveira Félix AU - Aroldo Félix de Azevedo Júnior AU - Carolina Costa Freitas AU - Carlos Augusto de Moraes Pires AU - Victor Teixeira AU - Roger Frety AU - Soraia Teixeira Brandão UR - https://scielo.figshare.com/articles/dataset/Pir_lise_r_pida_de_biomassa_de_eucalipto_na_presen_a_de_catalisador_Al-MCM-41/5772339 DO - 10.6084/m9.figshare.5772339.v1 L4 - https://ndownloader.figshare.com/files/10179330 L4 - https://ndownloader.figshare.com/files/10179336 L4 - https://ndownloader.figshare.com/files/10179342 L4 - https://ndownloader.figshare.com/files/10179345 L4 - https://ndownloader.figshare.com/files/10179348 L4 - https://ndownloader.figshare.com/files/10179354 L4 - https://ndownloader.figshare.com/files/10179357 L4 - https://ndownloader.figshare.com/files/10179366 KW - Residue KW - Thermal Process KW - Bio-oil N2 - ABSTRACT Latin America has considerable potential in the production of biomass, mainly for the use of its waste, Brazil being one of the most important representatives in the generation of energy from these renewable sources. In this sense, the paper approaches eucalyptus biomass, in the form of residue, as a promising source of low cost for the production of energy and chemical products. The objective of this work is to perform the fast pyrolysis at 500 °C in the presence of mesoporous Al-MCM-41 catalyst to evaluate the performance of the phases (bio-oil, biogas and bio-coal), as well as to analyze the products generated in the liquid phase using a gas chromatograph with a coupled mass spectrometer. The catalysts and the biomass were characterized by scanning electron microscopy (SEM) and X-ray fluorescence (FRX). Elemental analysis, immediate analysis, calorific value and thermogravimetric analysis were performed for eucalyptus. Bio-oil, bio-gas and bio-carbon yields were obtained, compatible with the literature, besides proving that the presence of the catalyst influences directly in this distribution. The main compounds identified were acetic acid, 1-hydroxy-2-propanone, 1-1-diethoxyethane, furfural, confirming the importance of the process for obtaining chemical products. ER -