Boschetti, Walter Torezani Neto Paes, Juarez Benigno Vidaurre, Graziela Baptista Arantes, Marina Donária Chaves Silva, João Gabriel Missia da QUALITY OF REACTION WOOD IN Eucalyptus TREES TILTED BY WIND FOR PULP PRODUCTION <div><p>ABSTRACT This study aims to evaluate the quality of normal, tension and opposite wood of eucalyptus trees lengthwise, in straight and inclined stems, affected by wind action. It also aims to explain the pulping parameters resultant from the quality of the wood. The trees were grouped into four tilt ranges, ranging from 0 to 50º, and the basic density, chemical composition of the wood, and performance in kraft pulping were assessed. Normal and tension wood had similar basic densities; while for opposite wood, the density was lower, being responsible for a decrease in reaction wood density. The chemical composition of the wood was influenced by the presence of reaction wood in the stem. Tension and opposite wood showed lower levels of extractives and lignin and higher holocellulose content when compared to normal wood, with favorable wood quality for pulping. The increase in holocellulose content and the reduction of lignin and extractives content contributed positively to a more delignified pulp and reduction of the Kappa number. However, after cooking the reaction wood under the same conditions as those of normal wood, reaction wood pulping tends to have a lower screen yields. Due to differences in basic density and chemical constituents between opposite and normal wood, it is recommended not to designate the opposite wood as normal wood.</p></div> Tension Wood;Opposite Wood;Cellulose Pulp 2017-12-05
    https://scielo.figshare.com/articles/dataset/QUALITY_OF_REACTION_WOOD_IN_Eucalyptus_TREES_TILTED_BY_WIND_FOR_PULP_PRODUCTION/5666581
10.6084/m9.figshare.5666581.v1