10.6084/m9.figshare.5106871.v1 Le Van Thuan Le Van Thuan Tran Bao Chau Tran Bao Chau Tran Thi Kieu Ngan Tran Thi Kieu Ngan Tran Xuan Vu Tran Xuan Vu Dinh Duc Nguyen Dinh Duc Nguyen Minh-Hiep Nguyen Minh-Hiep Nguyen Dang Thi Thanh Thao Dang Thi Thanh Thao Nguyen To Hoai Nguyen To Hoai Le Hoang Sinh Le Hoang Sinh Preparation of cross-linked magnetic chitosan particles from steel slag and shrimp shells for removal of heavy metals Taylor & Francis Group 2017 Cross-linked magnetic chitosan metal ion removal steel slag shrimp shells green tea 2017-06-14 05:28:52 Dataset https://tandf.figshare.com/articles/dataset/Preparation_of_cross-linked_magnetic_chitosan_particles_from_steel_slag_and_shrimp_shells_for_removal_of_heavy_metals/5106871 <p>In this study, a new method for preparation of cross-linked magnetic chitosan particles (MCPs) from steel slag and shrimp shells using green tea extract as crosslinking reagent has been presented. The MCPs obtained were characterized by means of X-ray diffraction analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy and magnetic properties, and then were used to investigate the adsorption properties of Cu(II) and Ni(II) ions in aqueous solutions. The influence of experimental conditions such as contact time, pH value, adsorbent dose and initial metal concentration, and the possibility of regeneration were studied systematically. The Cu(II) and Ni(II) adsorption isotherms, kinetics and thermodynamics have been measured and discussed. The results show that the synthesized MCPs have high adsorption capacity for both metal ions (126.58 mg/g for Cu(II) and 66.23 mg/g for Ni(II)), and have excellent regeneration stability with efficiency of greater than 83% after five cycles of the adsorption–regeneration process. The adsorption process of Ni(II) and Cu(II) on MCPs was feasible, spontaneous and exothermic, and better described by the Langmuir model and pseudo-second-order kinetic equation. The MCPs can be applied as a low cost and highly efficient adsorbent for removal of heavy metals from wastewater due to its high adsorption capacity, easy recovery and good reusability.</p>