10.6084/m9.figshare.4621933.v1
Jordan E. Trachtenberg
Jordan E.
Trachtenberg
Jesse K. Placone
Jesse K.
Placone
Brandon T. Smith
Brandon T.
Smith
John P. Fisher
John P.
Fisher
Antonios G. Mikos
Antonios G.
Mikos
Extrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients
Taylor & Francis Group
2017
Viscosity
composites
compressive modulus
bone tissue engineering
gradient
Atomic force microscopy, AFM
Analysis of variance, ANOVA
Phenylbis(246-trimethylbenzoyl)-phosphine oxide, BAPO
Diethyl fumarate, DEF
Dimethyl sulfoxide, DMSO
Extracellular matrix, ECM
Fourier transform-infrared spectroscopy, FT-IR
Hydroxyapatite, HA
(Tukey’s) Honestly Significant Difference test, HSD
Polydispersity index, PDI
Poly(propylene fumarate), PPF
Poly(propylene fumarate)-co-poly(ε-caprolactone), PPF-co-PCL
Sodium dodecyl sulfate, SDS
Scanning electron microscopy, SEM
Stereolithography, STL
Thermogravimetric analysis, TGA
Micro-computed tomography, μCT.
2017-02-06 06:52:19
Journal contribution
https://tandf.figshare.com/articles/journal_contribution/Extrusion-based_3D_printing_of_poly_propylene_fumarate_scaffolds_with_hydroxyapatite_gradients/4621933
<p>The primary focus of this work is to present the current challenges of printing scaffolds with concentration gradients of nanoparticles with an aim to improve the processing of these scaffolds. Furthermore, we address how print fidelity is related to material composition and emphasize the importance of considering this relationship when developing complex scaffolds for bone implants. The ability to create complex tissues is becoming increasingly relevant in the tissue engineering community. For bone tissue engineering applications, this work demonstrates the ability to use extrusion-based printing techniques to control the spatial deposition of hydroxyapatite (HA) nanoparticles in a 3D composite scaffold. In doing so, we combined the benefits of synthetic, degradable polymers, such as poly(propylene fumarate) (PPF), with osteoconductive HA nanoparticles that provide robust compressive mechanical properties. Furthermore, the final 3D printed scaffolds consisted of well-defined layers with interconnected pores, two critical features for a successful bone implant. To demonstrate a controlled gradient of HA, thermogravimetric analysis was carried out to quantify HA on a per-layer basis. Moreover, we non-destructively evaluated the tendency of HA particles to aggregate within PPF using micro-computed tomography (μCT). This work provides insight for proper fabrication and characterization of composite scaffolds containing particle gradients and has broad applicability for future efforts in fabricating complex scaffolds for tissue engineering applications.</p>