In the electronic supplementary material, Figure S1–S5 are included. from Halloysite nanotube-based electrospun ceramic nanofibre mat: a novel support for zeolite membranes ChenZhuwen ZengJiaying LvDong GaoJinqiang ZhangJian BaiShan LiRuili HongMei WuJingshen 2016 Some key parameters of supports such as porosity, pore shape and size are of great importance for fabrication and performance of zeolite membranes. In this study, we fabricated millimetre-thick, self-standing electrospun ceramic nanofibre mats and employed them as a novel support for zeolite membranes. The nanofibre mats were prepared by electrospinning a halloysite nanotubes/polyvinyl pyrrolidone composite followed by a programmed sintering process. The interwoven nanofibre mats possess up to 80% porosity, narrow pore size distribution, low pore tortuosity and highly interconnected pore structure. Compared with the commercial α-Al<sub>2</sub>O<sub>3</sub> supports prepared by powder compaction and sintering, the halloysite nanotube-based mats (HNMs) show higher flux, better adsorption of zeolite seeds, adhesion of zeolite membranes and lower Al leaching. Four types of zeolite membranes supported on HNMs have been successfully synthesized with either <i>in situ</i> crystallization or a secondary growth method, demonstrating good universality of HNMs for supporting zeolite membranes.