Ainla, Alar Gözen, Irep Orwar, Owe Jesorka, Aldo A Microfluidic Diluter Based on Pulse Width Flow Modulation We demonstrate that pulse width flow modulation (PWFM) can be used to design fast, accurate, and precise multistage dilution modules for microfluidic devices. The PWFM stage unit presented here yields 10-fold dilution, but several PWFM stages can be connected in series to yield higher-order dilutions. We have combined two stages in a device thus capable of diluting up to 100-fold, and we have experimentally determined a set of rules that can be conveniently utilized to design multistage diluters. Microfabrication with resist-based molds yielded geometrical channel height variances of 7% (22.9(16) μm) with corresponding hydraulic resistance variances of ∼20%. Pulsing frequencies, channel lengths, and flow pressures can be chosen within a wide range to establish the desired diluter properties. Finally, we illustrate the benefits of on-chip dilution in an example application where we investigate the effect of the Ca<sup>2+</sup> concentration on a phospholipid bilayer spreading from a membrane reservoir onto a SiO<sub>2</sub> surface. This is one of many possible applications where flexible concentration control is desirable. channel lengths;phospholipid bilayer;PWFM stages;Microfluidic Diluter;concentration control;example application;pulse width flow modulation;membrane reservoir;SiO 2 surface;microfluidic devices;diluter properties;dilution modules;PWFM stage unit;resistance variances;Pulse Width Flow ModulationWe;flow pressures;channel height variances 2009-07-01
    https://acs.figshare.com/articles/journal_contribution/A_Microfluidic_Diluter_Based_on_Pulse_Width_Flow_Modulation/2846593
10.1021/ac9010028.s001